Plan a boiler stove or solid fuel system in Melksham
A back boiler or boiler stove can heat water for the whole house from a fire you would light anyway, but it has to be plumbed so that excess heat always has somewhere safe to go. Combi Boiler Quotes helps you reach HETAS registered installers covering Melksham and the surrounding parts of Wiltshire.
Describe your set-up once and hear from up to four suitable installers. The number of responses depends on local coverage, capacity and the job. Four quotations are not guaranteed, and you do not have to accept a quote. Companies joining the network are asked for relevant insurance details and references; check current HETAS registration before booking.
Back boiler, boiler stove or independent boiler?
Like-for-like back boiler replacement is the cheapest option, but a boiler stove is usually far more efficient. Larger homes off the gas grid sometimes use an independent solid fuel boiler as their main heat source.
Common reasons for an enquiry
- Water weeping or hissing from behind the fire
- Banging, kettling or boiling noises when the fire is hot
- Radiators barely warming despite a good fire
- Smoke spilling into the room or tar stains on the chimney breast
- An appliance that is not exempt for use in a smoke control area
- A wish to cut oil or LPG use by heating water from a stove
Work an installer may include
- Inspecting the chimney and deciding whether a liner is needed
- Removing the old fire, back boiler and surround
- Installing the flue system to suit the appliance and fuel
- Plumbing in a gravity heat-leak circuit and safety valves
- Testing flue draw and controls before handover
The dustiest part of the job is removing the old fire and sweeping the chimney, so move furniture and cover anything you cannot take out of the room.
What to tell an installer before the survey
Say which fuel you burn or plan to burn, whether the appliance will heat radiators, hot water or both, and how many radiators the house has. Describe the chimney, when it was last swept and whether it is lined.
Say whether you are in a smoke control area; your council can confirm it. Mention any smoke smells, damp on the chimney breast or loose chimney pots.
Planning the installation
Agree how long the heating will be off, how dust will be controlled, and whether any chimney repairs are needed first.
What to check when the job is done
Ask for the HETAS certificate, operating instructions and advice on lighting, refuelling and controlling the fire. Check where the carbon monoxide alarm has been fitted and test it.
Plan for heat when the pump stops
Unlike a gas burner, burning logs cannot be switched off instantly by a thermostat. For an installation in Melksham, ask the designer to explain the gravity heat-leak route or other approved overheat protection. A boiler stove must be compatible with the proposed open-vented or sealed system; use only a design approved for that appliance. Include chimney inspection, floor protection, soot cleanup and operating instruction in the scope.
Guide costs for solid fuel boilers in Melksham
Use £2,500–£8,000 as an indicative UK budgeting range. A quotation for a property in Melksham may fall outside that range. Confirm whether the price includes VAT, the flue liner, hearth, plumbing and removal of the old appliance.
A like-for-like back boiler behind an existing fire sits at the lower end. A boiler stove with a new liner and hearth is mid-range, and linking a solid fuel appliance to an existing boiler through a thermal store is at the top.
Agree how any unexpected flue problems will be priced before work starts.
Rules that apply to solid fuel appliances
In England and Wales, a suitably registered installer can notify eligible solid fuel work through a competent person scheme such as HETAS; building control is an alternative route. HETAS installer guidance explains this distinction. Scotland and Northern Ireland have their own building requirements. The design must address the hearth, ventilation, flue, carbon monoxide alarm and safe removal of heat from the water circuit. Check smoke control restrictions for the actual appliance and fuel, rather than assuming every wood-burning boiler is suitable.
Check with the council whether smoke control rules apply to your street. Wiltshire Council can also confirm local planning and building control requirements.
Checks before appointing an installer
Check that HETAS registration covers boilers, not only room stoves. Ask how the heat-leak circuit will work, whether the chimney needs lining, and whether the appliance is exempt if you are in a smoke control area.
Compare the plumbing and flue work in each quote, not just the appliance price.
Installers covering Melksham and nearby areas
Coverage depends on each installer's working area, so give the actual property postcode. For work near Melksham, nearby-area links include Corsham, Trowbridge, Bradford-on-Avon, Devizes, Chippenham, Calne, Bath. A nearby listing does not confirm availability at your address in Wiltshire.
Questions about solid fuel boilers in Melksham
Use these questions to check the proposed installation.
How much does a solid fuel boiler cost in Melksham?
The site's guide range is £2,500 to £8,000. Replacing a back boiler behind an existing fire is at the lower end; boiler stoves with new liners and linked systems with a thermal store cost more.
Can I link a solid fuel boiler to my oil or gas boiler?
Yes, with the right design. A thermal store or link-up unit lets the solid fuel appliance heat the system when it is lit and the other boiler take over when it is not. It cannot simply be piped into a sealed combi system.
What fuel can I burn?
That depends on the appliance and whether you are in a smoke control area. Seasoned or kiln-dried wood and approved smokeless fuels are the usual choices; traditional house coal can no longer be sold for domestic use in England.
Who can install a solid fuel boiler?
In England and Wales, an installer with the appropriate HETAS registration can self-certify eligible work, or you can use building control. Scotland and Northern Ireland have different approval procedures; agree the route before work starts.
What should my written quote include?
The scope should cover the appliance, chimney inspection, flue, hearth, ventilation, water circuit and overheat protection. Ask about a carbon monoxide alarm, waste removal and the required approval or notification.
Request solid fuel boiler quotes in Melksham
Describe your solid fuel appliance and the heating circuit through the enquiry form. HETAS registered installers covering Melksham may contact you to discuss the job and a quotation.