Solid Fuel Boilers in Craven Arms
Old back boilers behind open fires are often leaking, scaled or running on altered pipework that no longer gives them a safe heat outlet. An enquiry here can put your solid fuel job in front of installers working around Craven Arms and the surrounding parts of Shropshire.
One free enquiry can help you receive up to four quotations. How many businesses respond depends on availability and the type of work. Four quotations are not guaranteed, and you do not have to accept a quote. Companies joining the network are asked for relevant insurance details and references; check current HETAS registration before booking.
The main types of solid fuel boiler
A back boiler sits behind an open or inset fire and heats water as the fire burns. A boiler stove is a closed stove with a water jacket, sending more heat to the radiators. An independent boiler is a dedicated appliance that can heat a whole house.
When to call an installer
- Water weeping or hissing from behind the fire
- Banging, kettling or boiling noises when the fire is hot
- Radiators barely warming despite a good fire
- Smoke spilling into the room or tar stains on the chimney breast
- An appliance that is not exempt for use in a smoke control area
- A wish to cut oil or LPG use by heating water from a stove
From chimney check to commissioning
- Sweeping the chimney and carrying out a smoke test
- Opening up the fireplace and preparing a compliant hearth
- Fitting a flexible flue liner and register plate
- Connecting to a thermal store or link-up unit where another boiler is present
- Commissioning the appliance, fitting a carbon monoxide alarm and issuing a HETAS certificate
The dustiest part of the job is removing the old fire and sweeping the chimney, so move furniture and cover anything you cannot take out of the room.
Before you ask for solid fuel quotes in Craven Arms
Say which fuel you burn or plan to burn, whether the appliance will heat radiators, hot water or both, and how many radiators the house has. Describe the chimney, when it was last swept and whether it is lined.
If you have an oil or gas boiler too, give its type, because linking two heat sources needs careful design. Photographs of the fireplace and the chimney stack, taken safely from the ground, help the installer prepare.
What to agree before the work
For a property in Craven Arms, agree access for the installer and any scaffolding needed at the chimney, how dust will be controlled and how long the heating will be off.
Before the installer leaves
Ask for the HETAS certificate, operating instructions and advice on lighting, refuelling and controlling the fire. Check where the carbon monoxide alarm has been fitted and test it.
Questions about the work at your property
A solid fuel fire continues producing heat after the controls stop calling for it. Before work in Craven Arms, have the installer explain how the boiler can shed heat during a power cut. A boiler stove must be compatible with the proposed open-vented or sealed system; use only a design approved for that appliance. Include chimney inspection, floor protection, soot cleanup and operating instruction in the scope.
What affects a solid fuel quote in Craven Arms?
The site's UK guide range for this service is £2,500–£8,000. This is not a measured average for Craven Arms or a fixed offer. Confirm whether the price includes VAT, the flue liner, hearth, plumbing and removal of the old appliance.
The plumbing can cost as much as the appliance, particularly where a heat-leak circuit or thermal store has to be added.
Ask whether chimney repairs are included or priced separately.
Building Regulations and smoke control
In England and Wales, a suitably registered installer can notify eligible solid fuel work through a competent person scheme such as HETAS; building control is an alternative route. HETAS installer guidance explains this distinction. Scotland and Northern Ireland have their own building requirements. The design must address the hearth, ventilation, flue, carbon monoxide alarm and safe removal of heat from the water circuit. Check smoke control restrictions for the actual appliance and fuel, rather than assuming every wood-burning boiler is suitable.
Your council can confirm whether your address is in a smoke control area. Shropshire Council can also confirm local planning and building control requirements.
Choosing a solid fuel installer around Craven Arms
Check that HETAS registration covers boilers, not only room stoves. Ask how the heat-leak circuit will work, whether the chimney needs lining, and whether the appliance is exempt if you are in a smoke control area.
Ask to see photographs of similar boiler stove installations they have completed.
Finding an installer who covers your postcode
Use the property postcode so installers can check their travel time and coverage. If you are comparing coverage around Craven Arms, check these nearby areas too: Church Stretton, Whitchurch, Ellesmere, Shrewsbury, Ludlow, Welshpool, Newtown. Give your postcode so the business can confirm it covers your part of Shropshire.
Solid fuel boilers questions for Craven Arms
These answers cover points to discuss with an installer before accepting a quotation.
How much does a solid fuel boiler cost in Craven Arms?
The site's guide range is £2,500 to £8,000. Replacing a back boiler behind an existing fire is at the lower end; boiler stoves with new liners and linked systems with a thermal store cost more.
Can I link a solid fuel boiler to my oil or gas boiler?
Yes, with the right design. A thermal store or link-up unit lets the solid fuel appliance heat the system when it is lit and the other boiler take over when it is not. It cannot simply be piped into a sealed combi system.
What fuel can I burn?
That depends on the appliance and whether you are in a smoke control area. Seasoned or kiln-dried wood and approved smokeless fuels are the usual choices; traditional house coal can no longer be sold for domestic use in England.
Who can install a solid fuel boiler?
In England and Wales, an installer with the appropriate HETAS registration can self-certify eligible work, or you can use building control. Scotland and Northern Ireland have different approval procedures; agree the route before work starts.
What should my written quote include?
The scope should cover the appliance, chimney inspection, flue, hearth, ventilation, water circuit and overheat protection. Ask about a carbon monoxide alarm, waste removal and the required approval or notification.
Ask local installers about solid fuel
Start with your postcode and fireplace details. HETAS registered installers covering Craven Arms may contact you to discuss the job and a quotation.