Back boiler and boiler stove installers in Daventry
Solid fuel heating is common in older and rural homes, and getting the flue and the plumbing right is what makes it safe. Combi Boiler Quotes helps you reach HETAS registered installers covering Daventry and the surrounding parts of Northamptonshire.
One free enquiry can help you receive up to four quotations. How many businesses respond depends on availability and the type of work. Four quotations are not guaranteed, and you do not have to accept a quote. Companies joining the network are asked for relevant insurance details and references; check current HETAS registration before booking.
Back boiler, boiler stove or independent boiler?
Like-for-like back boiler replacement is the cheapest option, but a boiler stove is usually far more efficient. Larger homes off the gas grid sometimes use an independent solid fuel boiler as their main heat source.
Common reasons for an enquiry
- Water weeping or hissing from behind the fire
- Banging, kettling or boiling noises when the fire is hot
- Radiators barely warming despite a good fire
- Smoke spilling into the room or tar stains on the chimney breast
- An appliance that is not exempt for use in a smoke control area
- A wish to cut oil or LPG use by heating water from a stove
Work an installer may include
- Inspecting the chimney and deciding whether a liner is needed
- Opening up the fireplace and preparing a compliant hearth
- Fitting a flexible flue liner and register plate
- Connecting to a thermal store or link-up unit where another boiler is present
- Commissioning the appliance, fitting a carbon monoxide alarm and issuing a HETAS certificate
The dustiest part of the job is removing the old fire and sweeping the chimney, so move furniture and cover anything you cannot take out of the room.
What to tell an installer before the survey
Say which fuel you burn or plan to burn, whether the appliance will heat radiators, hot water or both, and how many radiators the house has. Describe the chimney, when it was last swept and whether it is lined.
If you have an oil or gas boiler too, give its type, because linking two heat sources needs careful design. Photographs of the fireplace and the chimney stack, taken safely from the ground, help the installer prepare.
Planning the installation
For a property in Daventry, agree access for the installer and any scaffolding needed at the chimney, how dust will be controlled and how long the heating will be off.
What to check when the job is done
Ask for the HETAS certificate, operating instructions and advice on lighting, refuelling and controlling the fire. Check where the carbon monoxide alarm has been fitted and test it.
Plan for heat when the pump stops
A solid fuel fire continues producing heat after the controls stop calling for it. Before work in Daventry, have the installer explain how the boiler can shed heat during a power cut. A boiler stove must be compatible with the proposed open-vented or sealed system; use only a design approved for that appliance. Include chimney inspection, floor protection, soot cleanup and operating instruction in the scope.
Guide costs for solid fuel boilers in Daventry
The site's UK guide range for this service is £2,500–£8,000. This is not a measured average for Daventry or a fixed offer. Confirm whether the price includes VAT, the flue liner, hearth, plumbing and removal of the old appliance.
A like-for-like back boiler behind an existing fire sits at the lower end. A boiler stove with a new liner and hearth is mid-range, and linking a solid fuel appliance to an existing boiler through a thermal store is at the top.
Agree how any unexpected flue problems will be priced before work starts.
Rules that apply to solid fuel appliances
In England and Wales, a suitably registered installer can notify eligible solid fuel work through a competent person scheme such as HETAS; building control is an alternative route. HETAS installer guidance explains this distinction. Scotland and Northern Ireland have their own building requirements. The design must address the hearth, ventilation, flue, carbon monoxide alarm and safe removal of heat from the water circuit. Check smoke control restrictions for the actual appliance and fuel, rather than assuming every wood-burning boiler is suitable.
Your council can confirm whether your address is in a smoke control area. North Northamptonshire/West Northamptonshire can also confirm local planning and building control requirements.
Checks before appointing an installer
Check that HETAS registration covers boilers, not only room stoves. Ask how the heat-leak circuit will work, whether the chimney needs lining, and whether the appliance is exempt if you are in a smoke control area.
Ask to see photographs of similar boiler stove installations they have completed.
Installers covering Daventry and nearby areas
Use the property postcode so installers can check their travel time and coverage. You can also explore coverage around Daventry through Desborough, Thrapston, Rugby, Northampton, Towcester, Moulton, Irthlingborough. Give your postcode so the business can confirm it covers your part of Northamptonshire.
Before you book: solid fuel questions
For a property in Daventry, confirm the details with the installer who will do the work.
How much does a solid fuel boiler cost in Daventry?
The site's guide range is £2,500 to £8,000. Replacing a back boiler behind an existing fire is at the lower end; boiler stoves with new liners and linked systems with a thermal store cost more.
Can I link a solid fuel boiler to my oil or gas boiler?
Yes, with the right design. A thermal store or link-up unit lets the solid fuel appliance heat the system when it is lit and the other boiler take over when it is not. It cannot simply be piped into a sealed combi system.
What fuel can I burn?
That depends on the appliance and whether you are in a smoke control area. Seasoned or kiln-dried wood and approved smokeless fuels are the usual choices; traditional house coal can no longer be sold for domestic use in England.
Who can install a solid fuel boiler?
In England and Wales, an installer with the appropriate HETAS registration can self-certify eligible work, or you can use building control. Scotland and Northern Ireland have different approval procedures; agree the route before work starts.
What should my written quote include?
The scope should cover the appliance, chimney inspection, flue, hearth, ventilation, water circuit and overheat protection. Ask about a carbon monoxide alarm, waste removal and the required approval or notification.
Request solid fuel boiler quotes in Daventry
Send the details through the free enquiry form. HETAS registered installers covering Daventry may contact you to discuss the job and a quotation.