Replace your oil boiler in Fleet
Replacing an oil boiler is also the right time to look at the tank, fire valve and fuel line that feed it. Combi Boiler Quotes helps you reach oil heating technicians covering Fleet and the surrounding parts of Hampshire.
Describe your oil system once and hear from up to four suitable technicians. The number of responses depends on local coverage, capacity and the job. Four quotations are not guaranteed, and you do not have to accept a quote. Companies joining the network are asked for relevant insurance details and references; check current OFTEC registration before booking.
Indoor, external or oil combi?
Most oil boiler replacements are like-for-like, but it is worth considering an external model if indoor space is tight, or an oil combi if the hot water cylinder is due for replacement too.
Common reasons for a replacement enquiry
- A boiler over 15 years old that is not a condensing model
- Smoke or soot from the flue, or a strong kerosene smell indoors
- A cracked or corroded combustion chamber or heat exchanger
- Repeated burner lockouts even after servicing
- Oil leaking from the burner, pump or pipework
- Parts that are no longer available for the model
Work a technician may include
- Disconnecting and removing the old boiler and burner
- Fitting a new condensing boiler and connecting the condensate drain
- Checking the fuel line from the tank for damage or corrosion
- Fitting a new flue that meets the clearance rules for oil appliances
- Commissioning the burner with a combustion analyser and registering the work with OFTEC
If the tank is old or close to the house or a boundary, ask the technician to comment on it in writing. A replacement tank is often quoted separately.
What to tell a technician before the survey
Say whether the boiler is inside or outside, where the flue exits and whether you have a hot water cylinder. Give the age and material of the oil tank, and roughly how far it is from the house, boundaries and any drains or watercourses.
Photographs of the boiler, flue and tank help the technician judge the job before visiting. If you are thinking about HVO fuel in future, ask whether the boiler is compatible.
Planning the installation day
Agree how long the heating and hot water will be off, and keep access clear to the boiler, the tank and the route between them.
What to check when the job is done
Ask to be shown the controls and where the oil isolation valve is. Keep the commissioning record, warranty details and applicable compliance or building approval documents together for when you sell.
Include the tank and fuel line in the survey
Ask for a written assessment of the tank, base and oil supply before accepting the boiler price. For a home in Fleet, flag narrow delivery access and the route between the tank and boiler. The technician may need to renew the fire valve, filter or protected pipework. Specify who removes the redundant boiler, handles any fuel transfer and leaves the work area clean.
Guide costs for oil boiler replacement in Fleet
Use £3,000–£6,500 as an indicative UK budgeting range. A quotation for a property in Fleet may fall outside that range. Confirm whether the price includes VAT, the flue, fire valve, filter and removal of the old boiler.
An indoor boiler in the same position is the cheapest option. External boilers and oil combis cost a little more, and relocating the boiler with a new flue and fuel line pushes the price towards the top of the range.
Agree whether any tank work is included before accepting a quote.
Rules that apply to oil boilers and tanks
Use a competent oil heating installer and agree how the work will meet local building requirements. Under the appropriate OFTEC installation registration, self-certification is available in England and Wales; Scotland and Northern Ireland use different approval procedures. OFTEC consumer guidance explains the scheme. Tank condition, fire protection, spill containment and fuel-line safety need assessing even when only the boiler is being replaced. Registration for servicing alone does not establish installation competence.
If the property is listed or in a conservation area, check before installing an external boiler or a new tank. Hampshire County Council can confirm local planning and building control requirements.
Checks before appointing a technician
Check that OFTEC registration covers installation, ask how the boiler was sized, and request a written comment on the tank and fuel line. Confirm the warranty length and what servicing it requires.
Compare the boiler, flue and fuel line work in each quote, not just the total.
Technicians covering Fleet and nearby areas
Coverage depends on each technician's working area, so give the actual property postcode. For work near Fleet, nearby-area links include Farnborough, Aldershot, Farnham, Camberley, Sandhurst, Crowthorne, Wokingham. A nearby listing does not confirm availability at your address in Hampshire.
Questions about oil boilers in Fleet
Use these questions to check the proposed installation.
How much does a new oil boiler cost in Fleet?
The site's guide range is £3,000 to £6,500. An indoor boiler in the same position is at the lower end; external boilers, oil combis and relocations cost more. A new oil tank is usually priced separately.
How long does an oil boiler replacement take?
Most take one to two days. Moving the boiler, changing the flue or replacing the fuel line can add a third day.
Who can install an oil boiler?
An OFTEC registered technician can install and self-certify an oil boiler under the Building Regulations. If you use someone who is not registered, you would need to apply to building control before work starts.
Should I replace my oil tank at the same time?
Only if it needs it. Tanks that are leaking, bulging, on a cracked base or too close to the house or a boundary should be replaced. A technician can inspect the tank during the survey and advise.
What should my written quote include?
Ask for the boiler, flue, fire valve, filter, tank assessment and fuel-line work to be listed. Confirm whether tank replacement, fuel transfer, waste removal and local building approval are included.
Request oil boiler quotes in Fleet
Send technicians the details of your oil boiler and tank through the enquiry form. Oil heating technicians covering Fleet may contact you to discuss the job and a quotation.