New combi boiler quotes in Wellington
A new condensing combi can free up a cupboard, cut gas use and end the cycle of call-outs on a tired boiler. Combi Boiler Quotes helps you reach Gas Safe registered engineers covering Wellington and the surrounding parts of Shropshire.
One free enquiry can help you receive up to four quotations. How many businesses respond depends on availability and the type of work. Four quotations are not guaranteed, and you do not have to accept a quote. Companies joining the network are asked for relevant insurance details and references; check current Gas Safe registration before booking.
What a combi replacement involves
A straight combi-for-combi swap is the simplest version. Converting from a regular or system boiler means taking out the hot water cylinder, the tanks in the loft and redundant pipes, and sometimes moving the boiler.
Common reasons for a replacement enquiry
- A boiler more than 12–15 years old with a recent run of failed parts
- Hot water that cools whenever another tap is opened
- Pressure that falls every few days, needing the filling loop each time
- A model whose parts are discontinued or hard to source
- Rising gas bills from an old non-condensing boiler
- A cylinder and loft tanks taking space you want back
Work an engineer may include
- Checking the incoming flow rate and whether the gas supply can feed a larger combi
- Replacing the flue and adding a plume kit if the terminal is close to a neighbour
- Removing the cylinder, tanks and old boiler on a conversion
- Cleaning the system and fitting a magnetic filter to protect the new heat exchanger
- Setting up controls, commissioning and completing the Benchmark checklist
Ask whether the engineer has checked that a combi suits your household. Two bathrooms in use at the same time, or a weak mains supply, can make a system boiler with a cylinder a better choice.
What to tell an engineer before the survey
Give the number of bathrooms and showers, and say whether two are often used at once. Mention whether you have a combi now or a boiler with a cylinder, where the boiler is, and where the flue comes out. If you want the boiler moved to a loft or utility room, say so at the start.
A photograph of the boiler, its data badge and the flue terminal outside helps an engineer judge the job before visiting. If some radiators stay cold at the bottom, mention it, as sludge affects how the system should be cleaned.
Planning the installation day
For a property in Wellington, agree the start time, how long the water will be off and where the engineer can park and unload. Clear the area around the boiler, the airing cupboard and the loft hatch.
What to check when the job is done
Ask to be shown the controls, how to repressurise the boiler and where the filling loop is. Keep the Benchmark checklist, the warranty confirmation and the Building Regulations certificate together, as you will need them when you sell the house.
Check the water supply before choosing a combi
Ask the engineer to measure the incoming mains flow and pressure before recommending an output. Tell the installer about simultaneous hot-water use, existing shower pumps and planned bathrooms in Wellington. A system boiler and cylinder may suit higher simultaneous demand. On a conversion, identify which tanks still supply other fittings before agreeing their removal.
Guide costs for combi boiler replacement in Wellington
The site's UK guide range for this service is £1,900–£4,200. This is not a measured average for Wellington or a fixed offer. Confirm whether the price includes VAT, the flue, controls, system cleaning and removal of old equipment.
A like-for-like swap in the same position sits at the bottom of the range. Moving the boiler, rerouting the flue or upsizing the gas pipe pushes it up, and conversions from a cylinder system sit at the top.
Agree how any extra work, such as gas pipe upsizing, will be priced before it starts.
Rules that apply to a new boiler
Paid work on a gas boiler must be carried out by a business on the Gas Safe Register, using an engineer qualified for that appliance and fuel. In England and Wales, a suitably registered installer can notify a replacement through the relevant scheme; ask who handles notification and when the compliance certificate will arrive. Scotland and Northern Ireland have separate building standards and approval procedures. Confirm the route for your property before work starts. Controls, flue clearances and condensate disposal must meet the rules applying to the installation.
Planning permission is not usually needed, but a new flue on a listed building or in a conservation area can be. Shropshire Council can confirm local planning and building control requirements.
Checks before appointing an engineer
Check the engineer's Gas Safe card lists gas boilers, ask how they sized the combi and whether they measured your water flow, and confirm who registers the warranty. Ask whether they are an accredited installer for the brand, which can mean a longer warranty.
Compare the boiler, warranty and system cleaning in each quote, not just the total.
Engineers covering Wellington and nearby areas
Use the property postcode so engineers can check their travel time and coverage. You can also explore coverage around Wellington through Much Wenlock, Telford, Newport, Broseley, Shrewsbury, Bridgnorth, Market Drayton. Give your postcode so the business can confirm it covers your part of Shropshire.
Before you book: combi boiler questions
For a property in Wellington, confirm the details with the engineer who will do the work.
How much does a new combi boiler cost in Wellington?
The site's guide range is £1,900 to £4,200. A like-for-like swap in the same position is at the lower end, while relocating the boiler or converting from a system with a hot water cylinder costs more. Ask for an itemised quote naming the boiler model.
Can a combi replace my hot water cylinder?
Often, yes. A combi heats water on demand, so the cylinder and loft tanks can be removed. It suits homes with one bathroom and good mains flow; larger households using several showers at once may be better with a system boiler and cylinder.
How long does a combi replacement take?
A like-for-like swap usually takes one day. Converting from a regular or system boiler, or moving the boiler to a new position, typically takes two days.
Will I get a certificate for the new boiler?
Ask for the commissioning record and warranty registration. In England and Wales, a notified installation should also produce a Building Regulations compliance certificate; agree the appropriate approval and paperwork for Scotland or Northern Ireland with your installer.
What should my written quote include?
Ask for the boiler model, water-flow assessment, controls, flue, condensate route, system cleaning and disposal to be named. Confirm VAT, any cylinder or tank removal, and the notification and warranty arrangements.
Request combi boiler quotes in Wellington
Send the details through the free enquiry form. Gas Safe registered engineers covering Wellington may contact you to discuss the job and a quotation.